METRIC
MIL-DTL-11352K(AT)
01 April 2013
SUPERSEDING
MIL-DTL-11352J(AT)
22 September 2010
DETAIL SPECIFICATION
BLOCK, VISION: BULLET-RESISTANT (METRIC)
This specification is approved for use by the U.S. Army Tank Automotive Research,
Development and Engineering Center (TARDEC), Research, Development and
Engineering Command (RDECOM), Department of the Army, and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers bullet-resistant vision blocks of two different types
of construction, designed for use in combat type vehicles. In addition, this specification covers
vision blocks with and without laser protection filters (see 6.1).
1.2 Classification. Vision blocks covered by this specification are to be of the following
types, classes, and duties (see 6.2 and 6.5.1). All classes and duties are applicable to types I
and II:
Type I
- Steel cased
Type II
- Plastic cased
Class 1
- All-glass laminated construction
Class 2
- Composite-laminated glass-plastic construction
Class 3
- Transparent, laminated plastic construction
Duty A
- Light (see 6.5 1)
Duty B
- Medium (see 6.5.1)
Duty C
- Heavy (see 6.5.1)
Comments, suggestions, or questions on this document should be addressed to
U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,
ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000
or emailed to usarmy.detroit.rdecom.mbx.tardec-standardization@mail.mil. Since contact
information can change, you may want to verify the currency of this address information using
the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 25GP
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business